Electronic Entrance Security Turnstiles Systems In Airport /
Commercial customs turnstile gate IPW-EG1000:
Comprehensive personal safety protection:
■ Customs cturnstile gate IPW-EG1000 automatically open to evacuate
people in emergencies such as fire, power failure, etc.
■ Infrared and mechanical anti-clamping provide dual protection
■ Slowly push the door suddenly when the impact of the safety
beyond the scope to protect turnstile and effective pedestrians.
■ All electrical modules are designed to operate at 24 V with a
safe voltage, with residual current and configuration protection
device, effectively avoid electric shock.
■ Automatic adjustment function : When the turnstiles need to re-adjust because of mechanical wear,
the main board can automatically adjust, Accurate and convenient.
■ Emergency escape function : Equipped with emergency escape control device, the system can
automatically open the gate, easy for evacuation.
■ Automatic reset function : The turnstile will open the gate after receiving the legal opening
signal when standby. The swing gate will return to the hindered
zero position automatically under the following situation:
(1) Within the allowed time, pedestrians have been detected in the
specified direction passing the passage;
(2) Over the allowed time, there is no people has been detected
passing in the passage.
■ Open gate when the power is failure : Adopt the leading mechanical structureby original creation; the
system will unlock the gate automatically when power is off;
manually push the gate to be open and convenient to evacuate
people, which meets the fire requirement.
■ Anti-clamping function :
(1) Anti-pinch by infrared sensor : Install multi-pair of infrared
sensors near the anti-pinch area where swing gate is moving. Once
people or thing is detected within the anti-pinch area, the swing
gate will automatically stop moving; until the people or thing
leaves the anti-pinch area, the swing gate will continue to move.
(2) Mechanical anti-pinch : The swing gate will automatically stop
moving when the swing gate encounter obstacles; the impulse force
is within the safety range when the swing gate is moving.
■ Passing indication function :
(1) Direction indicator : The direction indicator is installed on the
top of the housing to indicate the legal passing direction.
(2) Passing status indicator : It is installed inside the housing,
indicating whether the swing gates can open after receiving the
|Normal passing||30 ~ 45 people / min(according to the condition of pedestrians)|
|Evacuate passing||60 people/min(according to the condition of pedestrians)|
|Housing material||304 grade stainless steel|
|Surface treatment||Brushed finish|
|Swing gate material||Organic glass|
|Control input/output||6 channels relay control output/ 4-channel dry contact signal input|
|Communication interface||RS485 / RS232；TCP/IP interface(customizable)|
|Driving motor||DC brushless motor|
|Method of position||Use the encoder to make sure the swing gate position|
|Method of motor control||Using high-performance DSP chip|
(1)The product design and specifications are subject to change
without prior notice.
(2)Please contact us directly for special features customization.