Secured Passager Entrance Subway Flap Barrier Turnstile in City
Shenzhen CMOLO Intelligent Technology Co., Ltd.is the world leader
of access control turnstile gate. The purpose for subway turnstile
machine is to effectively prevent passengers from fare evasion. The
electronic identification system of subway turnstile RPW-TGS3000
automatically recognizes whether the ticket is valid. If yes, the
subway open and allow the pedestrian to pass through .If not, the
subway turnstile is locked.
■ The subway turnstile has fast opening/closing speed and high
■ Having sensitive detection, subway turnstile is able to aviod
hurting pedestrians; high security level
■ The subway turnstile open automatically upon power failure; it
can evacuate the crowd rapidly in case of emergency
■ The subway turnstile is applicable for ultra high crowd flow rate
occasions; high astability
■ Housing material: 304 grade stainless steel
■ Casing Dimension: 1840×280×980(mm)
■ Surface treatment: Brushed finish
■ Opening speed of swing gate: 0.3-0.6s
■ The turning angle of swing gate: ±90°
■ Control input/output: 12 channels relay control output/ 8-channel dry contact signal
■ Communication interface: RS485 / RS232；TCP/IP interface(customizable)
■ Driving motor: DC brushless motor
■ Anti-tailgating function : Infrared sensors can detect the passing status of pedestrians, the
system will alarm automatically and close wing gate after detecting
the tailgating phenomenon.
■ Anti-clamping function :
■ Anti-pinch by infrared sensor : Install multi-pair of infrared sensors near the anti-pinch area
where wing gate is moving. Once people or thing is detected within
the anti-pinch area, the swing gate will automatically stop moving;
until the people or thing leaves the anti-pinch area, the wing gate
will continue to move.
■ Mechanical anti-pinch : The wing gate will immediately and reversely bounce off when the
wing gate encounter obstacles; the impulse force is within the
safety range when the wing gate is moving.
■ Anti-collision function : with anti-collision device ------ install specially-treated rail
protection device. The wing gate is moving stably without any
shaking, to achieve protecting mechanism and wing gate.
■ Open gate when the power is failure : adopt the leading mechanical structure created by CMOLO; the
system will unlock the gate automatically when power is off;
manually push the gate to be open and convenient to evacuate
people, which meets the fire requirement.
■ Passing mode : 【controlled mode】 /【 free mode 】/【 forbidden mode】 (The entry and
exit can be set independently)
■ Memory function of passing requests : More than 2 passing signals are given at the same time (including
the same direction and opposite direction), the system will
remember all the passing requests and finish them one by one.
■ Understanding the needs of the project
■ System engineers doing site survey
■ Gathering project information, setting up project team
■ Making professional plan (including functions, cost, design
drawing, 3D site simulation, module development, wiring planning,
■ Communicating with customer, verifying the feasibility of the