Subway Barrier Turnstile Gate Security Systems with Fingerprint
The electronic recognization system for subway turnstile
RPW-TGS3000 can automatically recognizes whether the relevant
information in the ticket is consistent with the current
information. When the ticky is damaged or overdue, the gate will
automatically lock and prevent the passengers from passing.
Otherwise, pedestrians can be allowed to pass through.
■ Way of motor control:Using high-performance DSP chip
■ Housing material: 304 grade stainless steel
■ Dimension(mm): 1840×280×980
■ Surface treatment: Brushed finish
■ Opening speed of turnstile: 0.3-0.6s
■ The turning angle of turnstile: ±90°
■ Control input/output: 12 channels relay control output/ 8-channel dry contact signal
■ Communication interface: RS485 / RS232；TCP/IP interface(customizable)
■ Driving motor: DC brushless motor
■ Compatibility:Equipped with the dry contact signal input interface, RS485/RS232
interface, TCP/IP interface (optional), compatible with all kinds
of access controllers.
■ Anti-tailgating function : Infrared sensors can detect the passing status of pedestrians, the
system will alarm automatically and close wing gate after detecting
the tailgating phenomenon.
■ Anti-clamping function
■ Anti-pinch by infrared sensor : Install multi-pair of infrared sensors near the anti-pinch area
where wing gate is moving. Once people or thing is detected within
the anti-pinch area, the swing gate will automatically stop moving;
until the people or thing leaves the anti-pinch area, the wing gate
will continue to move.
■ Mechanical anti-pinch : The wing gate will immediately and reversely bounce off when the
wing gate encounter obstacles; the impulse force is within the
safety range when the wing gate is moving.
■ Anti-collision function : with anti-collision device ------ install specially-treated rail
protection device. The wing gate is moving stably without any
shaking, to achieve protecting mechanism and wing gate.
■ Open gate when the power is failure : adopt the leading mechanical structure created by CMOLO; the
system will unlock the gate automatically when power is off;
manually push the gate to be open and convenient to evacuate
people, which meets the fire requirement.
■ Passing mode : 【controlled mode】 /【 free mode 】/【 forbidden mode】 (The entry and
exit can be set independently)
■ Built-in or external counter.
■ TCP / IP communication function.
■ Factory: integrate, install, and test other systems assigned by
■ On-site: plan ahead, instruct the installation, test, train, and
help with the acceptance
■ Assist to test other linked systems for the project